What is the tools required for installation when purchasing Solar Junction Box

 The tools required for installation when purchasing Solar Junction Box: 4 flathead screwdriver, Phillips screwdriver each one.The terminal box cover open: the M4 junction box on a flathead screwdriver in accordance with the label into the mounting holes on the lid, gently lift its foot, lift the corners of the edge so it goes first, you can open the box cover. There are wiring box cover, and lift you can see the three terminals.

Wiring panels: the left and right two terminals next to positive and negative signs, which represents the state of the battery output voltage in the work of positive and negative, in accordance with demand for electricity is then connected positive and negative then negative. Connection with mechanical compaction methods, with M4 Phillips screwdriver to unscrew the terminal of the clamping screw, the wires through the G7 after the peeled cable gland into the wiring hole in the line of compression. Cable connected, the protective lid, with a Phillips screwdriver M4 self-tapping screws into the screw hole, and fixed in the terminal box cover after cover, complete the wiring panels.Panels of ground: the solar panels installed grounding screw on the back, the ground wire can be fixed to the ground screw on safe ground.